EasyManua.ls Logo

Altera Cyclone IV - Chapter 3. Cyclone IV Dynamic Reconfiguration; Glossary of Terms

Altera Cyclone IV
490 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CYIV-52003-2.1
© 2011 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos
are trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as
trademarks or service marks are the property of their respective holders as described at www.altera.com/common/legal.html. Altera warrants performance of its
semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any products and
services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information, product, or service
described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device specifications before relying
on any published information and before placing orders for products or services.
Cyclone IV Device Handbook,
Volume 2
November 2011
Feedback Subscribe
ISO
9001:2008
Registered
3. Cyclone IV Dynamic Reconfiguration
Cyclone
®
IV GX transceivers allow you to dynamically reconfigure different portions
of the transceivers without powering down any part of the device. This chapter
describes and provides examples about the different modes available for dynamic
reconfiguration.
You can use the ALTGX_RECONFIG and ALTPLL_RECONFIG controller instance to
reconfigure the physical medium attachment (PMA) controls, physical coding
sublayer (PCS), multipurpose phase locked loops (PLLs), and general purpose PLLs.
This chapter contains the following sections:
“Glossary of Terms” on page 3–1
“Dynamic Reconfiguration Controller Architecture” on page 3–2
“Dynamic Reconfiguration Modes” on page 3–12
“Error Indication During Dynamic Reconfiguration” on page 3–36
“Functional Simulation of the Dynamic Reconfiguration Process” on page 3–37
Glossary of Terms
Table 31 lists the terms used in this chapter:
Table 3–1. Glossary of Terms Used in this Chapter (Part 1 of 2)
Term Description
ALTGX_RECONFIG Instance
Dynamic reconfiguration controller instance generated by the ALTGX_RECONFIG
MegaWizard
Plug-In Manager.
ALTGX Instance Transceiver instance generated by the ALTGX MegaWizard Plug-In Manager.
ALTPLL_RECONFIG Instance
Dynamic PLL reconfiguration controller instance generated by the ALTPLL_RECONFIG
Megawizard Plug-In Manager
Logical Channel Addressing
Used whenever the concept of logical channel addressing is explained. This term does not
refer to the
logical_channel_address
port available in the ALTGX_RECONFIG
MegaWizard Plug-In Manager.
November 2011
CYIV-52003-2.1

Table of Contents

Related product manuals