Anritsu S820E - Page 198

6-30 PN: 10580-00343 Rev. H S820E UG
6-11 Marker Menu VNA Mode
Marker Menu (Continued)
Key Sequence: Marker > Marker Search
Marker Search
Tracking (On Off): When turned On, the active marker
becomes a tracking marker and defaults to tracking the peak.
To track Valleys, press the Marker to Valley button after
turning on Tracking. The Search settings can all be applied
to a Marker with Tracking either On or Off.
Marker to Peak: Places the currently active marker on the
highest signal amplitude currently displayed on screen.
Marker to Valley: Places the currently active marker on the
lowest signal amplitude currently displayed on screen.
Figure 6-21. Marker Menu (2 of 2)
Marker to
Peak
Marker to
Valley
Marker Search
Tracking
Ma
rk
er
t
o
Pe
ak
aeSea
r
T
rac
k
i
ng
On O
Marker Setup