10-32 PN: 10580-00343 Rev. H S820E UG
10-11 File Menu File Management
Recall Menu
Key Sequence: File (7) > Recall
F
ile Recall
Recall: Press this submenu key to recall the selected file.
Measurements, setups, or screen shots can be recalled.
Recalled measurements are first displayed on the
Site Master as a preview. Press Enter to complete recalling
the measurement or press Esc to cancel the recall and
return to the File Recall menu. Refer to “Recall Files”
on page 10-14 for additional information.
Recalled setups change the current setup, including
measurement type, frequency/distance, amplitude, marker,
and limit data.
Recalled screen shots are previewed on the Site Master.
Press Esc to return to the File Recall menu.
Create Folder: Press this submenu key to create a new
folder in the highlighted location or folder. Name the new
folder with the onscreen keyboard and press Save.
Copy: Press this submenu key to copy the files or folders
(or both) that are selected and place them into memory for
pasting. Only files or folders from one location can be copied
at a time. Use the check-box column to select multiple items
to copy.
Paste: Press this submenu key to paste the selected files or
folders (or both) from memory to the current location. Use
the check-box column to select multiple items to copy. After
files are pasted, they are no longer in memory. If files or
folders with the same name already exist in the location, then
the Site Master will confirm that the existing files should be
overwritten.
Delete: Press this submenu key to delete the files or folders
(or both) that are selected. Only files or folders from one
location can be deleted at a time. Use the check-box column
to select multiple items to delete.
After an item is deleted it cannot be recovered!
Figure 10-32.Recall Menu (1 of 2)
File Recall
Recall
Create Folder
Copy
Paste
Delete
Navigation
To Next Page
Loading...
