Anritsu S820E - Easytest Tools on the PC; Create an Easytest File on the PC

14-2 PN: 10580-00343 Rev. H S820E UG
14-2 easyTest Tools on the PC Anritsu easyTest Tools
14-2 easyTest Tools on the PC
The software is available from the Anritsu Web site and is compatible with
Windows XP, Windows Vista, and Windows 7.
After installing and launching easyTest Tools, perform the following steps to
create an easyTest (.ett) file on the PC that can be opened on the S820E
Microwave Site Master.
Create an easyTest File on the PC
1. Drag the desired steps from the Command Selections pane (left side)
into the command Sequence pane (center). See Figure 14-1
on page 14-3..
Note Refer to the easyTest Tools Help for additional information.