S820E UG PN: 10580-00343 Rev. H 11-27
System Operations 11-9 Preset Menu
11-9 Preset Menu
Key Sequence: Preset (1)
Caution
Carefully read the information on screen before performing any of
the functions under the Preset menu. User files that are deleted
cannot be recovered.
Preset
Preset: Press this key to reset the instrument to the default
conditions.
Preset condition in Cable-Antenna mode: Return Loss
measurement, full frequency range, full amplitude scale, no
calibration, all markers off, and limit line off.
Reset
Reset: Press this key to display the reset options shown
below. Select the Reset option to apply using the
touchscreen, Up/Down Arrow keys or rotary knob. Carefully
read the on screen information before confirming the reset.
Factory Reset: Press this key to restore the
instrument to the factory default values, including
language, volume, display/audio settings. User saved
files and user created shortcut icons on the Menu
screen are not deleted.
Press the Factor Reset button to initiate the reset, and
power cycle the instrument. Press Esc to cancel and
close.
Delete All User Files: Deletes all user files in
Site Master internal memory including measurements,
setup files, and screen shots. Menu shortcuts,
customized EZ key names, and custom cable types
are not deleted.
To delete all user files, press the Delete All User Files
button and then press Yes to confirm.
Continued on next page
Figure 11-26. Preset Menu (1 of 2)
Preset
Reset
Update
Firmware
Preset
Reset
To Next Page
Loading...
