Anritsu S820E - Limit Menu

9-34 PN: 10580-00343 Rev. H S820E UG
9-17 Limit Menu High Accuracy Power Meter
9-17 Limit Menu
Key Sequence: Limit or Limit (6)
Limit
Limit: Turns the limits On or Off.
Fwd Upper Value: Sets the forward measurement upper
limit (displayed as red hash marks). Enter the desired
number by using the keypad, the rotary knob, or the
Up/Down Arrow keys. If the keypad was used to enter new
values, then press Enter to set the new setting or press the
Esc button to restore the previous setting.
Fwd Lower Value: Sets the forward measurement lower
limit (displayed as red hash marks). Enter the desired
number by using the keypad, the rotary knob, or the
Up/Down Arrow keys. If the keypad was used to enter new
values, then press Enter to set the new setting or press the
Esc button to restore the previous setting.
Rev Upper Value: Sets the reverse measurement upper
limit. Enter the desired number by using the keypad, the
rotary knob, or the Up/Down Arrow keys. If the keypad was
used to enter new values, then press Enter to set the new
setting or press the Esc button to restore the previous
setting.
Rev Lower Value: Sets the reverse measurement lower
limit. Enter the desired number by using the keypad, the
rotary knob, or the Up/Down Arrow keys. If the keypad was
used to enter new values, then press Enter to set the new
setting or press the Esc button to restore the previous
setting.
Figure 9-29. High Accuracy PM (MA24105A) Limit Menu
Limit
Limit
L
imi
t
On O
Fwd
Upper Value
Fwd
Lower Value
Rev
Upper Value
Rev
Lower Value
Limit