6-62 Writing the User Program ECODRIVE03-FL*-04VRS
DOK-ECODR3-FL*-04VRS**-FK01-EN-P
Example: The maximum velocity is 200 IU/s. The cycle time is 2 ms.
A normal input with a debouncing time of the time period of
one cycle is selected.
0000 SRM 1 +000000.000 +500 I0.01.0
The search velocity is 200 IU/s * 500 ‰ = 100 IU/s. The accuracy is >
0.4 mm.
With the Probe1 input (Connector X3 / Pin 4), there is no debouncing time
DQGWKHGHWHFWLRQRFFXUVZLWKLQDWLPHIUDPHRI
V
The accuracy is > 0.01 IU.
Ref1_bef_AE.WMF
Fig. 6-32: Example of Movement to a Reference Mark
Example of moving to a reference mark with offset programming:
0000 SRM 1 +000200.000 +500 I0.01.0
Ref2_bef1_AE.WMF
Fig. 6-33: Example of Moving to a Reference Mark with Offset Programming
To Next Page
Loading...
