ECODRIVE03-FL*-04VRS Diagnostic Message Descriptions 12-1
DOK-ECODR3-FL*-04VRS**-FK01-EN-P
12 Diagnostic Message Descriptions
12.1 Overview of the Diagnostic Message Descriptions
Diagnostic Message Types
Each operating state of the drive controller is identified with a diagnostic
message.
Distinctions are made between:
• Diagnostic Error Messages
• Diagnostic Warning Messages
• Command Diagnostic Messages
• Diagnostic Status Messages
• Operation Status
Composition of a Diagnostic Message
A diagnostic message consists of:
• a diagnostic message number and a
• Diagnostic Message Text
F228 Excessive deviation
Diagnostic message number
Diagnostic
message text
F-0304 NC - Command illegal
or
Fig. 12-1: Composition of Diagnostic Message with Diagnostic Message
Number and Text
For the example shown in the above graphic, "F-," "03" and "04" or "F2"
and "28" alternate in the H1 display.
Using status 53, the control can read the diagnostic message number
and the diagnostic message text as F228, Excessive deviation.
To Next Page
Loading...
