ECODRIVE03-FL*-04VRS Display 14-21
DOK-ECODR3-FL*-04VRS**-FK01-EN-P
Variable Value Editable
N0500 TXT 0 2-0-2-00-600-183
Parameter Description min. max.
2 Assignment: Variable Contents -- --
0 Reserved 0 0
2 Line 1 6(7)
00 Position 00 21
600 Variable Number 000 999
Format -- --
0 = Without operational sign
1 = With operational sign
01
Number of Places Before Decimal 1 8
183
1xx
x8x
xx3
Number of Places After Decimal 0 3
Fig. 14-10: Variable Value Editable
The contents of the programmed variable are written to the display
cyclically.
The current input position is shown as a negative value: To change the
value, it is possible to place the cursor in the field. Edited values are
shown in italics and are then no longer updated. By pressing OK, the
value is transferred and by pressing ESC, the old value is reestablished.
Display and Edit Parts of a Variable
The entire variable format : +00000000.000000
Depending on the format indicated, part of the variable value can be
displayed and edited. The invisible locations for the variables are not
changed and therefore remain intact.
Example:
V600 = + 00010000.000111
Display: 0000.000 Format: 043
Change: 0022.222
V600 = + 00010022.222111
Example: Display and Editing of Three Variables
TXT 0 2-0-4-10-600-043
TXT 0 2-0-5-15-601-030
TXT 0 2-0-6-14-602-040
To Next Page
Loading...
