ECODRIVE03-FL*-04VRS Parameters 9-17
DOK-ECODR3-FL*-04VRS**-FK01-EN-P
9.3 Function Parameters
AA00 Tasks 2 & 3
0100 0200 1
Reserved
Task 3 - Start Block
If ’0000’ appears here, Task 3 is not enabled.
max.: 0999
Task 2 – Start Block
If '0000' appears here, Task 2 is not enabled.
max.: 0999
For further details, see Section 8.7, 'Multitasking.'
AA01 Manual Vector
M2.02.2 0 0 0100
Program Start Block
Reserved
0 = Start only via Input Bit
1 = Jump to vector program, even when
switching from Automatic to Manual
Input Bit : Input number, program start at leading
edge of pulse
00.00.0 = no input selected
M0 – M5 ; M8 ; I0 -I4; Q0 - Q3
For further information, see Section 8.6 'Vector Programming.'
To Next Page
Loading...
