9-42 Parameters ECODRIVE03-FL*-04VRS
DOK-ECODR3-FL*-04VRS**-FK01-EN-P
B013 Fieldbus Format
Valid only for DKC3.3 with Profibus
0 1 0 0
Profile:
0 = Standard
1 = Expanded (with drive enable in the control word)
0 = Word Evaluation
1 = Byte Evaluation (in preparation)
0 = Intel
1 = Motorola
Format:
0 = Process Data channel with I/O diagnostic and variable
channel
1 = Process Data channel with I/O diagnostic
2 = Process Data channel with I/O, diagnostic, variable
channel and service data channel
For further information, see Section 11.2 Profibus Command
Communication.
B014 EMD Configuration
0 0 0 0
Reserved
Reserved
Number of EMD Modules (max. 2)
The connected module must have the same
Address as the drive
Reserved
See the chapter entitled "EMD Module"
To Next Page
Loading...
