10-24 Interface ECODRIVE03-FL*-04VRS
DOK-ECODR3-FL*-04VRS**-FK01-EN-P
Parameter
Parameters can be read out in any operating mode.
Format:
?sK_xxyy_$hh CR LF
In response to this query, the contents stored in the queried parameter
’xxyy’ are sent.
Ksxxyy_dddddddd_$hh CR LF
Meaning of the characters used:
x = Block identifier
y = Parameter number
d = Instruction information (number dependent on parameter)
Writing a parameter
#sK_xxyy_dddddddd_$hh CR LF
Meaning of the characters used:
x = Block identifier
y = Parameter number
d = Instruction information (number dependent on parameter)
Parameter Blocks Block Identifier Parameter Number
System Parameters A1 00 to 19
Function Parameters AA 00 to 19
General Parameters B0 00 to 14
Encoder Parameters C0 00 to 19
Controller Parameters CR 00 to 10
Motor Parameters CM 00 to 12
PLS Switch Press Encoder N1 00 to 31
Fig. 10-18: Parameter Groups
Read Out Parameters:
Write Parameters:
To Next Page
Loading...
