ECODRIVE03-FL*-04VRS Display 14-1
DOK-ECODR3-FL*-04VRS**-FK01-EN-P
14 Display
14.1 BTV04
The control will be programmed using the serial interface. For this
purpose, two different accessories are available.
MotionManager PC-Windows Program
or
BTV04 – Operator Console
A specific user program can be created, or a BTV04 preconfigured with
the firmware
FWA-BTV-ELC-01VRS
and the functions described below can be used.
btv04_COL.WMF
Fig. 14-1:Front Panel
To Next Page
Loading...
