ECODRIVE03-FL*-04VRS Parameters 9-51
DOK-ECODR3-FL*-04VRS**-FK01-EN-P
C017 SSI Encoder (Press Encoder)
2 0 00 12 0
PFB (Encoder monitoring)
0 = off
1 = on
Resolution in Bits:
9 - 12 for multi-turn format (tree)
9 - 24 for single-turn format
Number of Revolutions in Bits: (0 to 12)
Direction: 0 = forward
1 = reverse
Encoder Type:
0 = no press encoder
1 = multi-turn encoder (tree format)
2 = single-turn encoder
For encoder type <>0, the encoder emulation according to Parameter
C014 - C016 is turned off. An absolute encoder with SSI format can be
hooked up to connector X9. This encoder then outputs the data for the
PLS.
Note: In Manual and Automatic Mode, the SSI encoder is monitored.
If an error is detected in the SSI files, the following error
message is generated:
"F- 03 22 – SSI Encoder Error"
Note: The sum of Resolution in Bits and Number of Revolutions
in Bits must be lower or equal 24.
To Next Page
Loading...
