Bosch Rexroth OptiFeed-FS EcoDrive 03 FLP04VRS - Setup Menu

ECODRIVE03-FL*-04VRS Display 14-9
DOK-ECODR3-FL*-04VRS**-FK01-EN-P
Setup Menu
Instruction number
and Command
or
Command Contents
Command
Description
If the cursor is positioned
• on the command, the “up” and “down” cursor keys scroll through
the command list. In addition, the description of the command
function is shown in the last two lines.
• on the first space of the input fields, depending on the meaning of
the command input field, the user can scroll through 'M' = marker
flag, 'I' = input, 'Q' = output, or '0' = no meaning using the "up" and
"down" cursor keys. In addition, the description of this input field is
shown in the last two lines.
• at the beginning of the input field, and a variable should be
programmed, which can occur by directly entering the letter "V."
NC Program
M a n u a l .
S E T U P - M E N U
N C - P R O G R A M ( F 1 )
P A R A M E T E R ( F 2 )
P L C - P R O G R A M ( F 3 )
V A R I A B L E S ( F 4 )
F L A G S M 8 ( F 5 )
M a n u a l .
N C - P R O G R A M 'H'
0N O P
N o O p e r a t i o n
M a n u a l .
N C - P R O G R A M 'H'
9 9 9 P S A
1 + 0 0 0 5 0 0 . 0 0 0
9 9 9
P o s i t i o n i n g , A b s o l u t e
w i t h I n – P o s i t i o n