Bosch Rexroth OptiFeed-FS EcoDrive 03 FLP04VRS - Main Menu; Monitor - Menu

14-6 Display ECODRIVE03-FL*-04VRS
DOK-ECODR3-FL*-04VRS**-FK01-EN-P
Main Menu
After startup, the BTV04 always first asks for Control Address 5. If it is
detected, this menu is not shown.
If the address is not preselected, the BTV04 issues a transmission error.
This message must be cleared by repeatedly pressing the ESC key.
Then, this menu is displayed, and the controller address must be entered.
After confirming by pressing OK, the display switches back to the main
menu.
Status Line
e.g. DKC3.3-040-7
e.g. ECODR3-FLP-04V03
Monitor - Menu
Status Line
selected menu
F W A -B T V 0 4 E L C 0 1 V 0 8
E L C / F L P A D D R E S S
5
M A I N - M E N U ( O K )
M a n u a l .
M A I N M E N U
D K C x x . x – x x x - x
E C O D R 3 – X X X – x x V x x
M O N I T O R - M E N U ( F 1 )
S E T U P M E N U ( F 2 )
S T A T U S - M E N U ( F 3 )
M a n u a l .
M O N I T O R - M E N U
P O S I T I O N ( F 1 )
I / O - M E N U ( F 2 )
C O U N T E R ( F 3 )