Bosch Rexroth OptiFeed-FS EcoDrive 03 FLP04VRS - 12.6 Operation Status

ECODRIVE03-FL*-04VRS Diagnostic Message Descriptions 12-49
DOK-ECODR3-FL*-04VRS**-FK01-EN-P
12.6 Operation Status
The possible operating states are listed alphabetically below. These
states are displayed on the H1 display of the unit.
bb
"Ready for operation" (betriebsbereit)
See also: A013 Ready for power on
Ab
"Drive is ready" (Antrieb bereit)
See also diagnostic message: A012 Control and power sections ready
for operation.
Ad
"Input Address" (Adresse eingeben)
Basic Settings via S1, S2, S3. Duration of Display, approximately 20
seconds.
Diagnostic number: 0010
AF
"Drive enable" (Antrieb Freigabe)
The operation mode display HA or AU replaces this one.
AU
“Automatic” (Automatik)
See also: Automatic
Diagnostic number : 0004
HA
“Manual” (Hand)
See also: Manual
Diagnostic number : 0003
PA
"Parameters" (Parameter)
See also: Parameter
Diagnostic number : 0002
Jb
"Jog reverse" (Joggen backward)
Diagnostic number : 0006
JF
"Jog forward" (Joggen forward)
Diagnostic number : 0005