12-66 Diagnostic Message Descriptions ECODRIVE03-FL*-04VRS
DOK-ECODR3-FL*-04VRS**-FK01-EN-P
A- 0028 Control signal bit 3 invalid
The function was activated in Parameters AA14 and AA17, to compare
PLS positions with a particular state of an input signal. The state of the
input signal from Parameter AA17 did not correspond to the PLS position.
Check input signal and PLSs.
A- 0029 Control signal bit 4 invalid
The function was activated in Parameters AA14 and AA18, to compare
PLS positions with a particular state of an input signal. The state of the
input signal from Parameter AA18 did not correspond to the PLS position.
Check input signal and PLSs.
To Next Page
Loading...
