8-32 Functions ECODRIVE03-FL*-04VRS
DOK-ECODR3-FL*-04VRS**-FK01-EN-P
8.9 Application: Flying Cutoff
With the "Synchronization" function, "Flying Cutoff" can be programmed
into the user program.
The following functions can be implemented:
• Processing of lengths
• Cut inhibit with messaging output
• Immediate cut
• Moving away using the PSI/POI command
• Reverse inhibit
• Reduction of the reverse velocity/acceleration
• Shift home position
The following function cannot be implemented
Short length (between two processing operations, the carriage does not
move back to the original position).
To Next Page
Loading...
