ECODRIVE03-FL*-04VRS Writing the User Program 6-71
DOK-ECODR3-FL*-04VRS**-FK01-EN-P
2) Program B – velocity limited to 70% by
instruction number 0006
Veo2_bef_AE.WMF
Fig. 6-40: VEO Command – Limit Velocity to 70%
3) Program C - Multiplication by factor of ’500’ from instruction number
0008
Veo3_bef_AE.WMF
Fig. 6-41: VEO Command - Multiplication by a Factor
To Next Page
Loading...
