ECODRIVE03-FL*-04VRS EMD Module (EcoX-Bus) 15-13
DOK-ECODR3-FL*-04VRS**-FK01-EN-P
A 2.5 mm x 0.5 mm screwdriver is required for connecting a conductor
shows where the screwdriver is to be placed and Fig. 15-13 shows how to
attach a conductor with CAGE CLAMP
connectors.
mz0002f1_AE.WMF
Fig. 15-12: CAGE CLAMP
Connections
mz0001f1_AE.WMF
Fig. 15-13: CAGE CLAMP
Handling / Attaching a Conductor
Clamp Handling
To Next Page
Loading...
