EasyManua.ls Logo

Bosch Rexroth OptiFeed-FS EcoDrive 03 FLP04VRS - Page 57

Bosch Rexroth OptiFeed-FS EcoDrive 03 FLP04VRS
490 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ECODRIVE03-FL*-04VRS General Instructions for Start-Up 4-19
DOK-ECODR3-FL*-04VRS**-FK01-EN-P
Select the Download Baud Rate
Depending on the length of the serial interface cable, there is a physical
limit to the maximum baud rate at which serial communications will
proceed without errors.
The factory recommends a maximum download baud rate of 19.2 kBaud.
The baud rate can be increased considerably in some applications,
however, which helps achieve a reduction in the time needed for a
firmware update.
The following baud rates can be implemented at the specified cable
lengths.
Cable Length / m Max. Baud Rate / kBaud
2 115.2
5 57.6
10 57.6
15 38.4
Fig. 4-9: Maximum Baud Rate Depending on Cable Length

Table of Contents

Related product manuals