C
HAPTER
8
| Spanning Tree Algorithm
Configuring Interface Settings for MSTP
– 224 –
The recommended range is listed in Table 11 on page 215.
The default path costs are listed in Table 12 on page 215.
WEB INTERFACE
To configure MSTP parameters for a port or trunk:
1. Click Spanning Tree, MSTP.
2. Select Configure Interface from the Step list.
3. Select Configure from the Action list.
4. Enter the priority and path cost for an interface
5. Click Apply.
Figure 105: Configuring MSTP Interface Settings
To Next Page
Loading...
Need help?
General