C
HAPTER
23
| Authentication Commands
Telnet Server
– 634 –
ip telnet port This command specifies the TCP port number used by the Telnet interface.
Use the no form to use the default port.
SYNTAX
ip telnet port port-number
no telnet port
port-number - The TCP port number to be used by the browser
interface. (Range: 1-65535)
DEFAULT SETTING
23
COMMAND MODE
Global Configuration
EXAMPLE
Console(config)#ip telnet port 123
Console(config)#
ip telnet server This command allows this device to be monitored or configured from
Telnet. Use the no form to disable this function.
SYNTAX
[no] ip telnet server
DEFAULT SETTING
Enabled
COMMAND MODE
Global Configuration
EXAMPLE
Console(config)#ip telnet server
Console(config)#
To Next Page
Loading...
Need help?
General