C
HAPTER
20
| System Management Commands
System Status
– 530 –
■
Any configured settings for the console port and Telnet
EXAMPLE
Refer to the example for the running configuration file.
RELATED COMMANDS
show running-config (528)
show system This command displays system information.
DEFAULT SETTING
None
COMMAND MODE
Normal Exec, Privileged Exec
COMMAND USAGE
◆ For a description of the items shown by this command, refer to
"Displaying System Information" on page 97.
◆ The POST results should all display “PASS.” If any POST test indicates
“FAIL,” contact your distributor for assistance.
EXAMPLE
Console#show system
System Description : ECS3510-26P Managed FE POE Switch
System OID String : 1.3.6.1.4.1.259.10.1.38.104
System Information
System Up Time : 0 days, 7 hours, 20 minutes, and 43.30 seconds
System Name :
System Location :
System Contact :
MAC Address (Unit 1) : 00-E0-0C-00-00-FD
Web Server : Enabled
Web Server Port : 80
Web Secure Server : Enabled
Web Secure Server Port : 443
Telnet Server : Enabled
Telnet Server Port : 23
Jumbo Frame : Disabled
System Fan:
Unit 1
POST Result:
Console#
To Next Page
Loading...
Need help?
General