C
HAPTER
4
| Basic Management Tasks
Displaying Hardware/Software Versions
– 98 –
PARAMETERS
These parameters are displayed:
◆ System Description – Brief description of device type.
◆ System Object ID – MIB II object ID for switch’s network
management subsystem.
◆ System Up Time – Length of time the management agent has been
up.
◆ System Name – Name assigned to the switch system.
◆ System Location – Specifies the system location.
◆ System Contact – Administrator responsible for the system.
WEB INTERFACE
To configure general system information:
1. Click System, General.
2. Specify the system name, location, and contact information for the
system administrator.
3. Click Apply.
Figure 3: System Information
DISPLAYING HARDWARE/SOFTWARE VERSIONS
Use the System > Switch page to display hardware/firmware version
numbers for the main board and management software, as well as the
power status of the system.
CLI REFERENCES
â—† "System Management Commands" on page 525
To Next Page
Loading...
Need help?
General