C
HAPTER
26
| Interface Commands
Power Savings
– 748 –
EXAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#power-save
Console(config-if)#
show power-save This command shows the configuration settings for power savings.
SYNTAX
show power-save [interface interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 25-26)
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show power-save interface ethernet 1/4
Power Saving Status:
Ethernet 1/1 : Enabled
Console#
To Next Page
Loading...
Need help?
General