C
HAPTER
36
| Multicast Filtering Commands
IGMP Snooping
– 904 –
EXAMPLE
The following shows the current IGMP snooping configuration:
Console#show ip igmp snooping
IGMP snooping : Disabled
Router port expire time : 300 s
Router alert check : Disabled
Tcn flood : Disabled
Tcn query solicit : Disabled
Unregistered data flood : Disabled
Unsolicited report interval : 400 s
Version exclusive : Disabled
Version : 2
Proxy reporting : Disabled
Querier : Disabled
Vlan 1:
--------
IGMP snooping : Enabled
IGMP snooping running status : Inactive
Version : 2
Version exclusive : Using global status (Disabled)
Immediate leave : Disabled
Last member query interval : 10 (unit: 1/10 s)
Last member query count : 2
General query suppression : Disabled
Query interval : 125
Query response interval : 100 (unit: 1/10 s)
Proxy query address : 0.0.0.0
Proxy reporting : Using global status (Disabled)
Multicast Router Discovery : Enabled
.
.
.
show ip igmp
snooping mrouter
This command displays information on statically configured and
dynamically learned multicast router ports.
SYNTAX
show ip igmp snooping mrouter [vlan vlan-id]
vlan-id - VLAN ID (Range: 1-4093)
DEFAULT SETTING
Displays multicast router ports for all configured VLANs.
COMMAND MODE
Privileged Exec
COMMAND USAGE
Multicast router port types displayed include Static or Dynamic.
To Next Page
Need help?
General