C
HAPTER
14
| Basic Administration Protocols
Configuring Event Logging
ā 375 ā
To specify SMTP servers:
1. Click Administration, Log, SMTP.
2. Select Configure Server from the Step list.
3. Select Add from the Action list.
4. Specify the host name or IP address of an SMTP server. If
authentication is enabled, specify the name and password for a user
configured on the SMTP server.
5. Click Apply.
Figure 207: Specifying SMTP Servers
To show a list of configured SMTP servers:
1. Click Administration, Log, SMTP.
2. Select Configure Server from the Step list.
3. Select Show from the Action list.
Figure 208: Showing Configured SMTP Servers
To Next Page
Loading...
