C
HAPTER
23
| Authentication Commands
Web Server
– 630 –
ip http port This command specifies the TCP port number used by the web browser
interface. Use the no form to use the default port.
SYNTAX
ip http port port-number
no ip http port
port-number - The TCP port to be used by the browser interface.
(Range: 1-65535)
DEFAULT SETTING
80
COMMAND MODE
Global Configuration
EXAMPLE
Console(config)#ip http port 769
Console(config)#
RELATED COMMANDS
ip http server (630)
show system (530)
ip http server This command allows this device to be monitored or configured from a
browser. Use the no form to disable this function.
SYNTAX
[no] ip http server
DEFAULT SETTING
Enabled
COMMAND MODE
Global Configuration
EXAMPLE
Console(config)#ip http server
Console(config)#
RELATED COMMANDS
ip http port (630)
show system (530)
To Next Page
Loading...
Need help?
General