C
HAPTER
16
| IP Services
Displaying the DNS Cache
– 468 –
4. Click Apply.
Figure 279: Configuring Static Entries in the DNS Table
To show static entries in the DNS table:
1. Click IP Service, DNS, Static Host Table.
2. Select Show from the Action list.
Figure 280: Showing Static Entries in the DNS Table
DISPLAYING THE DNS CACHE
Use the IP Service > DNS - Cache page to display entries in the DNS cache
that have been learned via the designated name servers.
CLI REFERENCES
◆ "show dns cache" on page 952
COMMAND USAGE
◆ Servers or other network devices may support one or more connections
via multiple IP addresses. If more than one IP address is associated
with a host name via information returned from a name server, a DNS
client can try each address in succession, until it establishes a
connection with the target device.
PARAMETERS
These parameters are displayed:
◆ No. – The entry number for each resource record.
To Next Page
Loading...
