C
HAPTER
23
| Authentication Commands
TACACS+ Client
– 620 –
tacacs-server port This command specifies the TACACS+ server network port. Use the no
form to restore the default.
SYNTAX
tacacs-server port port-number
no tacacs-server port
port-number - TACACS+ server TCP port used for authentication
messages. (Range: 1-65535)
DEFAULT SETTING
49
COMMAND MODE
Global Configuration
EXAMPLE
Console(config)#tacacs-server port 181
Console(config)#
show tacacs-server This command displays the current settings for the TACACS+ server.
DEFAULT SETTING
None
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show tacacs-server
Remote TACACS+ Server Configuration:
Global Settings:
Server Port Number : 49
Key : *
Server 1:
Server IP Address : 192.168.1.25
Server Port Number : 181
Server Time Out : 4
Key : *
Console#
To Next Page
Loading...
Need help?
General