C
HAPTER
22
| Remote Monitoring Commands
– 606 –
EXAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#rmon collection rmon1 controlEntry 1 owner mike
Console(config-if)#
show rmon alarms This command shows the settings for all configured alarms.
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show rmon alarms
Alarm 1 is valid, owned by
Monitors 1.3.6.1.2.1.16.1.1.1.6.1 every 30 seconds
Taking delta samples, last value was 0
Rising threshold is 892800, assigned to event 0
Falling threshold is 446400, assigned to event 0
.
.
.
show rmon events This command shows the settings for all configured events.
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show rmon events
Event 2 is valid, owned by mike
Description is urgent
Event firing causes log and trap to community , last fired 00:00:00
Console#
show rmon history This command shows the sampling parameters configured for each entry in
the history group.
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show rmon history
Entry 1 is valid, and owned by
Monitors 1.3.6.1.2.1.2.2.1.1.1 every 1800 seconds
Requested # of time intervals, ie buckets, is 8
Granted # of time intervals, ie buckets, is 8
Sample # 1 began measuring at 00:00:01
Received 77671 octets, 1077 packets,
61 broadcast and 978 multicast packets,
To Next Page
Loading...
Need help?
General