C
HAPTER
24
| General Security Measures
Network Access (MAC Address Authentication)
– 677 –
clear
network-access
Use this command to clear entries from the secure MAC addresses table.
SYNTAX
clear network-access mac-address-table [static | dynamic]
[address mac-address] [interface interface]
static - Specifies static address entries.
dynamic - Specifies dynamic address entries.
mac-address - Specifies a MAC address entry. (Format: xx-xx-xx-
xx-xx-xx)
interface - Specifies a port interface.
ethernet unit/port
unit - This is unit 1.
port - Port number.
(Range: Range: 1-26)
DEFAULT SETTING
None
COMMAND MODE
Privileged Exec
EXAMPLE
Console#clear network-access mac-address-table interface ethernet 1/1
Console#
show
network-access
Use this command to display the MAC authentication settings for port
interfaces.
SYNTAX
show network-access [interface interface]
interface - Specifies a port interface.
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-26)
DEFAULT SETTING
Displays the settings for all interfaces.
COMMAND MODE
Privileged Exec
To Next Page
Loading...
Need help?
General