C
HAPTER
13
| Security Measures
AAA Authorization and Accounting
– 281 –
When specifying the priority sequence for a sever, the server index
must already be defined (see "Configuring Local/Remote Logon
Authentication" on page 277).
WEB INTERFACE
To configure the parameters for RADIUS or TACACS+ authentication:
1. Click Security, AAA, Server.
2. Select Configure Server from the Step list.
3. Select RADIUS or TACACS+ server type.
4. Select Global to specify the parameters that apply globally to all
specified servers, or select a specific Server Index to specify the
parameters that apply to a specific server.
5. To set or modify the authentication key, mark the Set Key box, enter
the key, and then confirm it
6. Click Apply.
Figure 139: Configuring Remote Authentication Server (RADIUS)
To Next Page
Loading...
Need help?
General