C
HAPTER
3
| Using the Web Interface
Navigating the Web Browser Interface
– 52 –
LACP Allows ports to dynamically join trunks 73
Spanning Tree 76
System Configures global bridge settings for RSTP 77
Ports Configures individual port settings for RSTP 78
Port Security Configures global and port settings for IEEE 802.1X 82
HTTPS Configures secure HTTP settings 88
SSH Configures Secure Shell server 89
IGMP Snooping 90
Basic
Configuration
Configures global and port settings for multicast filtering 91
Port Group
Filtering
Configures multicast groups to be filtered on specified port 95
LLDP Configures global LLDP timing parameters, and port-specific
TLV attributes
96
MAC Address Table Configures address aging, dynamic learning, and static
addresses
99
VLANs 101
VLAN Membership Configures VLAN groups 102
Ports Specifies default PVID and VLAN attributes 103
Private VLANs
PVLAN
Membership
Configures PVLAN groups 105
Port Isolation Prevents communications between designated ports within
the same private VLAN
106
QoS 107
Ports Configures default traffic class, user priority, queue mode,
and queue weights
108
DSCP Remarking Remarks DSCP values to standard CoS classes, best effort,
or expedited forwarding
109
QoS Control List Configures QoS policies for handling ingress packets based
on Ethernet type, VLAN ID, TCP/UDP port, DSCP, ToS, or
VLAN priority tag
111
Rate Limiters Configures ingress and egress rate limits 114
Storm Control Sets limits for broadcast, multicast, and unknown unicast
traffic
116
ACL 118
Ports Assigns ACL, rate limiter, and other parameters to ports 118
Rate Limiters Configures rate limit policies 119
Access Control List Configures ACLs based on frame type, destination MAC type,
VLAN ID, VLAN priority tag; and the action to take for
matching packets
120
Mirroring Sets source and target ports for mirroring 128
Table 4: Main Menu
Menu Description Page