GE LOGIQ 7 Basic User Manual

Optimizing B-Mode
LOGIQ 7 Online Help 5-31
Direction 2392536-100 Rev. 1
B Contrast Presets
You access the B Contrast Imaging and TruAgent Imaging
Presets via Utility --> Imaging --> BCON or TAD tabs.
Acoustic Output
Presets
To set the acoustic output value for B Contrast Imaging, press
the down arrow next to Acoustic Output (%) to select the value.
To set the acoustic output value for the background image while
in TruAgent Detection, press the down arrow next to Acoustic
Output for Fundamental (%) to set the value.
Time Delay To set the Trigger time delay, press the down arrow next to Time
Delay.
Background To adjust the level of the background anatomy, press the down
arrow next to Background when scanning in Coded Harmonic
Angio mode.
Additional Presets To adjust other B Contrast Imaging presets (Line Density, Frame
Average, etc.), press the down arrow to adjust the setting. See
Chapter 16 for more information.
TruAgent Detection Presets
Default Map To set the default TruAgent map, press the down arrow next to
Default Map.
Acoustic Output To set the acoustic output value for TruAgent Detection Imaging,
press the down arrow next to Acoustic Output (%) to set the
value.
Additional Presets To adjust other TruAgent Detection Imaging presets (Line
Density, Frame Average, etc.), press the down arrow to adjust
the setting. See Chapter 16 for more information.

GE LOGIQ 7 Specifications

General

Brand	GE
Model	LOGIQ 7
Category	Medical Equipment
Language	English