Optimizing the Image
5-50 LOGIQ 7 Online Help
Direction 2392536-100 Rev. 1
Deleting a
Sample Area
Sample ROIs and their corresponding traces can be deleted
using Delete Sample Area.
1. Select Delete Sample Area; a pull-down menu displays.
Figure 5-21. Delete Sample Area pull-down menu
2. Select Current sample to delete the currently active ROI.
Select Delete all to delete all currently set ROIs and all of
their traces.
NOTE: The corresponding traces for the deleted ROIs are erased from
the plot.
NOTE: Deleting an ROI causes the ROIs to be deleted from all frames
in the analysis loop.
To Next Page
Loading...
Need help?
General
