Optimizing B-Mode
LOGIQ 7 Online Help 5-51
Direction 2392536-100 Rev. 1
TIC Plot Control
The following controls are user configurable presets which are
configurable via the Utility Menu or through the pull-down menu
in TIC Analysis mode. When using the pull-down menu:
1. Position the cursor over the analysis window and press the
left Set key. The system menu displays at the cursor
position.
2. Select the appropriate parameter.
Vertical Unit When analyzing the contrast data, the Y-axis can be set to
display either longarithmic scale (dB) or linear, acoustic units
(AU) for both tissue intensity (2D) or Angio intensity data.
To toggle between dB and acoustical display units for the Y-axis.
• dB—The traditional log compressed B-mode data is used to
calculate the time-intensity curve values.
• Acoustic—The system reverse the log compression
function to provide un-log compressed data for the TIC
analysis.
Figure 5-22. Vertical Unit Pop-up menu
To Next Page
Loading...
Need help?
General
