Optimizing the Image
5-56 LOGIQ 7 Online Help
Direction 2392536-100 Rev. 1
Disabling/Enabling the frame
Frame disabling excludes the actual frame from the cineloop
display. Frame disabling is available only with contrast data.
Disabling the
frame from the
frame marker
To disable One Frame :
1. Use the Trackball to move the cursor to the frame maker to
disable.
2. Press Set to disable the frame.
3. The frame marker is changed from green to red to indicate
the frame has been disabled.
NOTE: The disabled frame is no longer displayed in the reference
window when scrolling through CINE memory.
Disabling multi-
frames from the
frame marker
1. Use the trackball to move the cursor to the first frame maker
to disable.
2. Press and hold down Set
3. Move the cursor with the Trackball to the last frame to be
disabled and release Set.
The marker is turn red and the data from that frame is
removed from the trace and any subsequent trace
processing.
Disabling a frame
from the cineloop
window
1. Use the trackball to move the cursor to the cineloop window.
2. Press the left Set key. The system menu displays.
3. Select Disable frame.
The current frame is disabled and the corresponding frame
marker displays red.
Disabling ECG
triggered frame
In a multi-cycle acquisition, the user may deselect all frames in
all heart cycles but a selected one. This function can be used for
example to select a particular systolic frame for each heart
cycle.
1. Scroll through the cineloop to identify the cardiac phase to
analyze or identify the cardiac phase on the ECG trace.
2. Position the cursor on the ECG trace and press Set. The
system menu displays.
3. Select ECG tirggering.
All frames in all heart cycles are disabled except for the
selected and corresponding frames in the other heart
cycles.
To Next Page
Loading...
Need help?
General
