Measurement and Calculation Setup
LOGIQ 7 Basic User Manual 7-31
Direction 2392206-100 Rev. 1
Removing items from the Touch Panel (continued)
To remove an item from the Selection menu:
1. Move the Trackball to the item in the Available folders and
measurements list.
2. To clear the check box for the item, move the Trackball to
the check box and press Set.
The system removes the item from the Selection menu, the
Measure & Study list, and from the Touch Panel. It is also
not listed in the Summary Window.
To Next Page
Loading...
Need help?
General
