GE LOGIQ 7 Basic User Manual

Measurement and Calculation Setup
LOGIQ 7 Basic User Manual 7-39
Direction 2392206-100 Rev. 1
Adding a user-defined measurement (continued)
Defining
measurement
parameters
After you add a measurement, you can add parameters. You
may also want to change parameters if you copied an existing
measurement. See ‘Changing or adding measurement
parameters’ for more information.
Changing or adding measurement parameters
You can make changes to measurement parameters and you
can add measurement parameters.
Changing
measurement
parameters
To change a measurement parameter:
1. In the Selection menu, select the measurement.
2. To change the name of the Parameter, move the Trackball
to the parameter name and press Set twice. Type a name
for the parameter.
For a description of other measurement changes, See
‘Changing Measurements’ for more information.

GE LOGIQ 7 Specifications

General

Brand	GE
Model	LOGIQ 7
Category	Medical Equipment
Language	English