GE LOGIQ 7 Basic User Manual

ReportWriter
14-28 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
Text Fields
1. Move the cursor where the Text Field is to be inserted.
Press Set.
2. Move the cursor to the Customize menu and select Text
Field. Press Set.
3. The Text Field dialog box displays.
Figure 14-25. Text Field Dialog Box
4. Enter the Heading Text.
5. Select Display item.
• Ref.Reason: Get information from the Direct Report.
• Comments: Get information from the Comment field of
the Patient screen and the Exam Comment field of the
Worksheet.
• Diagnosis: Get information from the Direct Report.
• Free Text: 1 - 8
6. Specify the border of the Text Field and Font as necessary.
7. Select OK or Cancel.
The text is saved automatically into the corresponding area
selected on this dialog box.
Edit an existing
Text Field
1. Move the cursor to the Text Field to be edited.
2. Press Set twice.
3. The Text Field dialog box displays.
4. Edit the heading, the settings, or font, as necessary.
5. Select OK or Cancel.

GE LOGIQ 7 Specifications

General

Brand	GE
Model	LOGIQ 7
Category	Medical Equipment
Language	English