Recording Images
15-32 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
Transferring Patient Data (continued)
3. A beep on the peripheral device indicates a successful
transfer. If there is a problem with the connection or
transfer, the system displays an error message.
NOTE: If you currently do a heart rate measurement without specifying
a vessel, as in the case of a fetal heart, the measurement IS
NOT automatically transferred to the PC. You need to enter this
measurement manually on the PC.
NOTE: Deleted measurements from the worksheet are still sent to the
off-line reporting PC.
To Next Page
Loading...
Need help?
General
