GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
3 - 20 Section 3-5 - Preparing for Setup
3-6-4 Connections on the Patient I/O Panel
3-6-4-1 Connect ECG
Connect ECG to Patient I/O Module in the front of Vivid 7.
3-6-4-2 Connect Phono
Connect Phono to Patient I/O Module in the front of Vivid 7.
3-6-4-3 Connect Pulse Pressure Transducer
Connect Pulse Pressure Transducer to Patient I/O Module in the front of Vivid 7.
Figure 3-7 ECG connection to Patient I/O Module
Figure 3-8 Phono connection
Figure 3-9 Pulse Pressure Transducer connection
ECG connection
Phono connection
Pulse Pressure Transducer connection
To Next Page
Loading...
