GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
3 - 36 Section 3-7 - . Configuration
3-7-3 Optional Peripherals/Peripheral Connection
3-7-3-1 Approved Internal Peripherals
This list covers the internal peripherals approved for Vivid 7:
• Printer, Black & White, Video, SONY.
• Printer, Black & White, Digital, SONY (needs software version v3.0 or above and BEP2).
• Printer, Monochrome, Digital, SONY UP-D897SYN
• Printer, Monochrome, Digital, SONY UP-D895MD (needs software version v3.0 or above and
BEP2).
• Printer, Color, Video, SONY, both PAL and NTSC versions are available.
• Printer, Color, Digital, SONY UP-D21MD
• Printer, Color, Digital, SONY UP-D23MD
• DVD Recorder, JVC BD-X201M (introduced for software v6.0)
• VCR, SONY, both PAL and NTSC versions are available.
• VCR, PANASONIC, both PAL and NTSC versions are available.
• VCR, MITSUBISHI HS-MD3000E
See the Vivid 7 Peripherals Installation Manual, Direction Number FC294048, for installation
instructions for the peripherals listed above.
• MO Drive (option) (mounted inside Back-End Processor).
• CD-R Drive (part of Back-End Processor) (BEP1, BEP2 and BEP2.2)
• CD/DVD Drive (part of Back-End Processor) (BEP3.x and BEP4.x)
• USB Flash Card, 256 MB (needs software version v4.0 or higher). Install in USB port on front of
Vivid 7.
NOTICE
Vivid 7 with BEP1, BEP2 and BEP2.2 supports CD-R disks. CD-RW disks are not supported.
Vivid 7 with BEP3, BEP3.2 and BEP4.x supports both CD-R and DVD-R disks.
To Next Page
Loading...
