GE Vivid 7 - Functional Checks; Overview; Purpose of Chapter 4; Contents in Chapter 4

GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
Chapter 4 - Functional Checks 4 - 1
Chapter 4
Functional Checks
Section 4-1
Overview
4-1-1 Purpose of Chapter 4
This chapter provides procedures for quickly checking major functions of the Vivid 7 scanner,
diagnostics by using the built-in service software, and power supply adjustments.
4-1-2 Contents in Chapter 4
4-1-3 Special Equipment Required
• An empty (blank) MO Disk;
- P/N: 066E0519 (5.4 GB)
- P/N: 066E0514 (8.6 GB)
- P/N: 066E0516 (9.1 GB)
• Un-used/un-formatted CD-R discs
• Un-used/un-formatted DVD-R discs
• ECG Pads
• ECG Harness, CABLE ECG MARQ. AHA/AMERICA, P/N:164L0025
- CABLE ECG MARQ. AHA/AMERICA, P/N:164L0025
- LEADWIRES ECG MARQ. AHA/AMERICA, P/N: 164L0027
or
- CABLE ECG MARQ. IEC / EU + AS, P/N:164L0026
- LEADWIRES ECG MARQ. IEC / EU + AS, P/N:164L0028
• At least one probe (ideally you should check all the probes used on the system by the site.)
See Probes on page 9-80, for an overview of available probes.
Table 4-1 Contents in chapter 4
SECTION DESCRIPTION PAGE NUMBER
4-1 Overview 4-1
4-2 General Procedures 4-2
4-3 Functional Checks 4-28
4-4 Application Turnover Check List 4-82
4-5 Power Supply 4-82
4-6 Site Log 4-82