GE Vivid 7 - Power Shut down

GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
Chapter 4 - Functional Checks 4 - 7
4-2-3 Power Shut Down
When you switch off the unit, the system performs an automatic shutdown sequence.
Depending on software version, the following Shut Down modes are available:
• Standby Mode (Only available on units with software version v2.x and v3.x.)
• Full Shut Down
The SYSTEM - EXIT menu, used when switching off the unit, gives you the choices described below.
Figure 4-7 System - Exit menu
SYSTEM EXIT MENU ON UNITS
WITH SOFTWARE VERSION v2.x.
SYSTEM EXIT MENU ON UNITS WITH
SOFTWARE VERSION v3.x.
SYSTEM EXIT MENU ON UNITS WITH
SOFTWARE VERSION
v7.x/v6.x/