GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
Chapter 3 - System Setup 3 - 27
3-6-7 Switching OFF the Unit
See 4-2-3 "Power Shut Down" on page 4-7 for a detailed description.
1.) Press the ON/STANDBY
button on the top left of the Control Panel to display the Exit dialog
window.
2.) Select SHUTDOWN
.
The shutdown process takes a few seconds and is completed when the Operator Panel
illumination is turned off.
To completely switch off the unit before disconnecting the Mains Power Cable, follow the additional
steps below:
3.) Switch the Circuit Breaker (on rear of unit) to OFF
.
4.) Remove the plug from the mains power outlet.
To Next Page
Loading...
