GE Vivid 7 - FRU Parts for BEP4 as Replacement for BEP2.0

GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
Chapter 9 - Renewal Parts 9 - 53
9-19-5 FRU Parts for BEP4 as Replacement for BEP2.0
Figure 9-22 BEP 4 Parts
Table 9-38 FRUs for BEP4 as Replacement for BEP2.0 sheet 1 of 2
ITEM PART NAME
PART
NUMBER DESCRIPTION QTY FRU
1 BEP4 WITHOUT MO DRIVE FC200809
Back-End Processor without MOD, with Frame Grabber.
Use ONLY on units with RFT.
1Y
2 MO DRIVE, 9.1 GB FC200271 MOD DRIVE WITH MOUNTING BRACKETS 1 Y
3 POWER SUPPLY, w/UPS 2404028-4 Power Supply for BEP w/UPS 1 Y
SECURING CLAMP F/MAIN POWER
CABLE
TBD 1 N
4 DVD DRIVE
2404028
OR
2404028-10
2404028-10 REQUIRES A SOFTWARE PATCH 1 Y
5 PATIENT IO MODULE (FRU) 2348186-22
SAME AS FA200801
MCD REVISION F OR HIGHER OR 01 (OR HIGHER)
MAY ALSO BE USED.
1Y
6 FAN FOR BACK END PROCESSOR 2404028-11 For BEP3, BEP3.2 and BEP4.x 1 Y
7 BEP3 HDD FRU 2404028-2
80 GBYTES SATA HARD DISK DRIVE FOR BEP3.
MOUNTING HARDWARE INCLUDED.
1 Y
HARD DISK DRIVE 160GB 2404028-1 1 Y
8 PC2IP2B FC200656 Communication between BEP and FEP2 (PC2IP 2B) 1 Y
9 GRAPHIC CARD 066E0334 1 Y
10 DGVIC TRAY, COMPLETE FC200676 1 Y
11 DVI LOOPBACK CABLE 2354056 1 Y
BACK-END
PROCESSOR
PARTS NOT ILLUSTRATED
1
23
4
5
6
7
8 9 10 11 12 13
1